Router Bits & Cutting Tools



Magnate manufactures a full line of router bits including profiles that were designed by Legacy specifically for 4- and 5-axis turning. These cutter profiles are listed in Legacy’s CCAM (Conversational CAM) software and the full list can be added to Vectric’s Aspire, VCarve Pro and VCarve Desktop software. Magnate uses the highest quality micro-grain carbide for all their carbide tipped cutters. Their selection, pricing, and service are excellent.

800 827 2316

Precise Bits

Precise Bits manufactures and a line of 3D carving tools.  Their 3 and 4 flute tapered ball nose cutters are designed for high-sheer producing minimum fuzzing while the high flute volume design supports high feed rates / chip loads.

Cutting Tool Source

CTS provides Quality Carbide End Mills, Drills, Step Drills, Reamers, Corner Rounders, Custom End Mills, Key Cutters and other Cutting Tools all at Manufacturer Direct Prices!

Donek Tools

The Donek Tools Drag Knife can be used to cut almost anything you would cut with a utility knife, but with the speed and precision of a CNC router.

The Donek Drag Knife fits into your CNC router or spindle collet, making it a universal fit for almost any CNC router available. The tools were designed to use a utility knife blade (though a specific type) which dramatically reduces the cost of consumable blades.

Laser Center / Edge Finder

Insert the laser into your spindle to find the edges or a part, Set the X axis and Y axis zero position, align parts and more.

Widget Works Unlimited

Widget Works produces a line of specialty bits including diamond engraving and vinyl cutting tools for CNC.


2.5D and 3D Models


Dust Collection


Kent CNC

One of the most innovative, easy to use CNC dust shoes available. The “Split-Shoe” is a two piece shoe. An upper acrylic plate clamps around the bottom portion of the router/spindle. A brush ring is attached to the upper acrylic plate by rare earth magnets. This removable brush ring configuration provides quick and easy access for bit changes and the clear acrylic allows the bit to be viewed during cutting.


Vacuum Table Components


Black Box Vacuum System

Makers of the cross over vacuum systems for CNC. Black Box Vacuum products where designed as a solution for the small to mid-sized shops that only have single phase power.

Fein Tools

The fein dust extractor (shop vac) is an inexpensive alternative to large vacuum plumps.  The two motor system keeps the system running cool even when the suction is completely stopped.

Vacuum Table Parts

Vacuum foam cording; Part#8605K43, 3/8″ weather-resistant EPDM foam


Clamping Components



Festool Clamping elements provide a “no-profile” clamping solution, freeing your work surface from obstruction.  These clamps use a sliding cam mechanism to quickly secure / release your parts.  The post are metric so it requires a metric hole size for the bench dog table on your Maverick CNC.


Incra Build-It Clamps lock your workpiece in place for consistent, safe cutting results. Exclusive captured pivot design for hassle free clamping.  These clamps can be used with any T Track system.

Craft Supplies USA

Double-sided tape for holding down components when you need access to the entire top surface and all four sides of the part.  This is the best product on the market.  It holds extremely well and will not leave a residue when removed.


Spindle Components


Mari Tool

Makers of precise ER20 collets and collet nuts.  Available in both metric and standard sizes.


Digital Angle Gauge



The Wixey Digital Angle Gauge allows you to accurately set the angle of the Maverick CNC adjustable bed when turning tapers using Legacy’s exclusive 5th axis. The gauge has 0.1 degree resolution.


Sanding Supplies


RJR Studios

The Sand-Flee portable drum sander allows you to sand on the face, edge or end of your parts while the pre-assembled sanding mops will quickly perform your touch up sanding on carved components.